CD420


CD420 

  CD420


   - ولتاژ منبع تغذیه : AC220V±20% 47~63Hz
   - توان  نامی خروجی (کیلووات): 0.2-0.75
   - ابعاد (میلی متر) : 166X141X61

 

Model parameter CD420-AA-000       
Power Main supply voltage Single-phase AC220V±20%  47~63Hz
Control circuit voltage DC24V  1A
Current Rated current(RMS) 4A
Peak current(PEAK) 15A
Feedback signal 2500PPR (incremental encoder with 5V )
Brake chopper Use an external braking resistor if necessary
Brake chopper threshold DC380V±5V
Over-voltage alarming threshold DC400V±5V
Under-voltage alarming threshold DC200V±5V
Cooling method Natural air cooling
Weight 1.2kg
Position
Mode
  Max. frequency of input pulse Differential signal: 500KPPS, Open-collector signal: 200KPPS
  Pulse command mode Pulse+direction, CCW+CW,  (higher voltages than 5V need external current limiting resistors)(do not support A+B phase)
  Command smoothing Low-pass filtering(Adjustable by internal parameters)
  Feedforward gain Adjustable by internal parameters
  Electronic gear ratio Setting range, Gear factor: -32768~32767, Gear divider: 1~32767, 1/50|Gear factor/Gear divider|50
  Position loop sampling frequency 1KHz
Speed
Mode
  Analog input voltage range 0 ~±10V(Resolution 12bit)
  Input impedance 200K
  Analog input sampling frequency 4KHz
  Command source External analog command/iAdjustable by internal parameters
  Command smoothing Low-pass filtering(Adjustable by internal parameters)
  Input voltage dead-zone setting Adjustable by internal parameters
  Input voltage offset settiong Adjustable by internal parameters
  Speed limit Adjustable by internal parameters
  Torque limit Adjustable by internal parameters / External analog command control
  Speed loop sampling frequency 4KHz
Torque
Mode
  Analog voltage input range 0 ~±10V (Resolution 12bit)
  Input impedance 200K
  Input sampling frequency 4KHz
  Command source External analog command/internal command
  Command smoothing Low-pass filtering(Adjustable by internal parameters)
  Speed limit Adjustable by internal parameters/External analog command control
  Input voltage dead-zone setting Adjustable by internal parameters
  Input voltage offset setting Adjustable by internal parameters
  Current sampling frequency 16KHz
Digital
Input
  Input specification 7 digital inputs, with COM1 terminal for PNP or NPN connection.
  Input function Define freely according to requirement, supporting following functions: Driver enable,driver fault reset,driver mode control,Proportional control, forward inhibit limit, reverse inhibit limit, negative limit position,home signal, speed command reverse, internal speed or position select 
Digital
Onput
  Output specification 5 digital outputs,OUT1OUT4 current is 100mA,OUT5 current is 800mA
  Output function Define freely according to requirement, supporting following functions: Driver ready, driver fault, position reached, motor at zero speed, motor brake, motor speed reached, N signal
Protection functions Over-voltage protection,under-voltage protection,motor over-heat protection(I²T),short-circuit protection,drive over-heat protection,etc.
Communication interface RS232
Operation
Environment
  Operating temperature 0~40
  Storage temperature -10~70
  Humidity(non-condensing) 5~95%
  Protection class IP20
  Installation environment Installed in a dust-free,dry and lockable environment(such as in a electrical cabinet)
  Installation mode Vertical installation
  Altitude Below 1000m
  Atmospheric pressure 86kpa~106kpa

 

 

 

 

نام فایل نوع فایل فرمت تاریخ دریافت فایل
Russian Kinco CD Series Servo Usermanual راهنمای کاربری   2013-11-01
Russian Kinco CD/CD2 Series Servo Catalog کاتالوگ محصول zip 2013-11-01
CD Series Servo user Manual راهنمای کاربری zip 2013-08-30
Kinco Products Catalog کاتالوگ محصول zip 2012-08-03
CE Certificate- PLC、servo 、stepper گواهینامه ها و... rar 2012-07-12
CD/CD2 Servo Catalog کاتالوگ محصول zip 2012-06-25
CD Servo Leaflet کاتالوگ محصول zip 2011-05-19

نام فایل نوع فایل فرمت تاریخ دریافت فایل

 

JoomShaper